Set the Adjuster Knob/resistance selector to “4” to allow for accurate filling capacity.
Remove rubber fill plug from the top of the tank.
Place a large bucket of water next to the rower. Position the Siphon with rigid hose in the bucket, and flexible hose in the tank.
NOTE: Make sure small breather valve on siphon is closed before filling.
Squeeze siphon to begin filling.
NOTE: Do not overfill tank.
When full, open the valve on the top of the siphon to allow excess water to escape.
Once filling is completed, add 1 x Water Treatment Tablet per full tank, then replace the tank plug.
WARNING: Do not under any circumstances us a water treatment tablet other than those supplied with your unit.
CAUTION: It is strongly recommended that a drop cloth be used under the fluid tank whenever the tank plug is opened for water treatment.
NOTE: Your unit purchase includes 4 x Water Treatment Tablets which is sufficient for several years of use.