How do I remove the Bungee Shock Cord?

Step 1.

Move the rowing handle to its furthest forward point on the Mainframe, then cut the plastic end tie, and follow the illustration below for bungee removal:


Step 2.

Remove the Upper Frame Plug to allow the Bungee Shock Cord to be threaded through the top of the frame.

NOTE: You will need to rotate the Belt/Bungee Pulley to align the holes properly. Should the belt drop off during the bungee change, please refer to the “How do I re-attach the Rower Belt” FAQ

Step 3.

Once the Bungee Cord and Upper Frame hole are aligned, push the Bungee Cord up and through the Frame as shown in the illustration: 



Have more questions? Submit a request


Please sign in to leave a comment.
Powered by Zendesk